JL Audio
JL Audio C2-600cw 6″ component speakers
99,00 €
JL Audio C2-600cw is a 6-inch standalone component woofer/midrange speaker intended for building active car audio systems or replacing an existing C2 component speaker. It is a single speaker, so the price and the set apply to one driver.
In stock
We install it in our Maleva 2C workshop in Tallinn. Ask for a time and a quote.
Description
The C2-600cw uses a mineral-filled polypropylene cone designed to deliver smooth midrange reproduction and strong, controlled mid-bass. The driver has a longer-excursion design and a stamped steel frame.
JL Audio C2 series woofer/midrange drivers are designed to fit a variety of vehicles. The speaker frame has several mounting patterns, which simplify installation in different factory speaker locations.
The C2-600cw has a continuous power handling of 60 W RMS, and the manufacturer recommends an amplifier with 15–100 W RMS per channel. Nominal impedance is 4 Ω, sensitivity 90.5 dB and frequency response 59 Hz – 22 kHz.
NB! Price per piece
Additional information
| Size | 15 cm / 6" |
|---|---|
| Product code | 010-03848-00 |
| Type | component woofer/midrange speaker |
| Number of speakers | 1 pc |
| Continuous power handling | 60 W RMS |
| Recommended amplifier power | 15–100 W RMS / channel |
| Nominal impedance | 4 Ω |
| Sensitivity | 90.5 dB (SPL @ 1 W / 1 m) |
| Frequency response | 59 Hz – 22 kHz (±3 dB) |
| Voice coil diameter | 1″ (25 mm) |
| Cone material | mineral-filled polypropylene |
| Frame outer diameter | 158 mm |
| Grille outer diameter | 163 mm |
| Motor outer diameter | 80 mm |
| Cutout diameter | 127 mm |
| Mounting depth | 60 mm |
| Grille protrusion | 23 mm |
| Grille | included |
| Included | 1 woofer/midrange speaker, protective grille with JL Audio logo, connector terminals and mounting screws. |





