JL Audio
JL Audio C3-650cw 6.5″ component speakers
169,00 €
The JL Audio C3-650cw is a 6.5-inch standalone component woofer/midrange speaker from the JL Audio C3 Convertible Component series. It is a single woofer/midrange driver that can be used as part of a C3-series component audio system or to replace a suitable existing driver.
In stock
We install it in our Maleva 2C workshop in Tallinn. Ask for a time and a quote.
Description
The C3 series is designed to offer the most flexible installation options possible. In a complete C3 system, the tweeter can be installed separately from the woofer/midrange driver or coaxially in the centre of the driver. This allows the system to be adapted to the vehicle’s original speaker locations and the desired installation solution.
The C3-650cw uses a JL Audio DMA-optimised woofer/midrange driver designed to deliver better bass reproduction and lower distortion. In addition, the C3 series uses Elevated Frame Cooling™ construction, which improves driver cooling and helps increase power handling. The cone is made of mineral-filled polypropylene.
The C3-650cw has a continuous power handling of 75 W RMS, and the manufacturer recommends using an amplifier with a power of 25–150 W RMS per channel. The nominal impedance is 4 Ω, the sensitivity is 90 dB and the frequency response is 48 Hz – 25 kHz.
NB! Price on request
Additional information
| Size | 16.5 cm / 6.5" |
|---|---|
| Product code | 010-03842-00 |
| Type | component woofer/midrange speaker (woofer) |
| Number of speakers | 1 pc |
| Continuous power handling | 75 W RMS |
| Recommended amplifier power | 25–150 W RMS / channel |
| Nominal impedance | 4 Ω |
| Sensitivity | 90 dB (SPL @ 1 W / 1 m) |
| Frequency response | 48 Hz – 25 kHz (±3 dB) |
| Voice coil diameter | 1.2″ (30 mm) |
| Cone material | mineral-filled polypropylene |
| Speaker connections | spade connectors |
| Frame outer diameter | 165 mm |
| Mounting depth | 65 mm |
| Cutout diameter | 141 mm |
| Grille outer diameter | 171 mm |
| Motor outer diameter | 104 mm |
| Grille protrusion | 26.2 mm |
| Included | 1 woofer/midrange speaker, 6 × 1¼” mounting screws and a protective grille with the JL Audio logo. |





